Schedule Can-Am SxS & UTV Service in Wichita, Kansas!
The Can-Am Maverick series has earned a reputation for power, performance, and off-road capability. However, like any high-performance machine, it can experience some common issues. In this guide, we’ll break down the most frequent problems Maverick owners encounter, how to troubleshoot them, and when to bring your UTV to Big Dog Powersports for professional repairs.
Schedule service in Wichita, Kansas for your Can-Am Maverick here.
1. Starting Problems
Symptoms:
- Engine won’t start
- Clicking sound when turning the key
- Dash lights flickering or not illuminating
Potential Causes and Solutions:
- Weak or Dead Battery: Ensure the battery terminals are clean and secure. Test the battery voltage; if it’s below 12.6 volts, recharge or replace it.
- Faulty Starter Solenoid: Listen for a clicking sound. If present, inspect the solenoid and replace it if necessary.
- Ignition Switch Issues: Check the ignition switch wiring for loose connections or damage.
When to Visit Big Dog Powersports: If the issue persists after addressing the above causes, our technicians can perform a full diagnostic to pinpoint the problem.
2. Overheating
Symptoms:
- Engine overheating warning light
- Coolant boiling or leaking
- Reduced engine performance
Potential Causes and Solutions:
- Low Coolant Levels: Check the coolant reservoir and top off with the recommended type if needed. Inspect for leaks in the radiator or hoses.
- Clogged Radiator: Clean the radiator fins of debris, mud, or dirt.
- Faulty Thermostat or Water Pump: Replace these components if they’re not functioning properly.
When to Visit Big Dog Powersports: Persistent overheating can damage your engine. Bring your Maverick in for a cooling system inspection and repairs.
3. Belt Slipping or Breaking
Symptoms:
- Loss of power during acceleration
- Burning rubber smell
- Unusual noises from the CVT area
Potential Causes and Solutions:
- Worn or Damaged Belt: Inspect the CVT belt for signs of wear, cracking, or glazing. Replace it if necessary.
- Misaligned Clutches: Check for proper alignment of the primary and secondary clutches.
- Excessive Heat: Avoid riding at low speeds for extended periods, as this can cause the belt to overheat.
When to Visit Big Dog Powersports: We can replace your belt and inspect the CVT system for underlying issues to prevent future problems.
4. Suspension Issues
Symptoms:
- Uneven ride height
- Clunking noises
- Poor handling
Potential Causes and Solutions:
- Worn Shock Absorbers: Inspect the shocks for leaks or damage and replace them if necessary.
- Loose Suspension Components: Tighten all bolts and check for worn bushings or ball joints.
- Bent A-Arms or Tie Rods: Inspect for visible damage and replace as needed.
When to Visit Big Dog Powersports: If your suspension feels off, let our experts fine-tune it for maximum comfort and performance.
5. Electrical Issues
Symptoms:
- Malfunctioning lights
- Intermittent power loss
- Faulty gauge cluster
Potential Causes and Solutions:
- Loose or Corroded Connections: Inspect and clean all electrical connections, especially ground wires.
- Blown Fuses: Replace any blown fuses with ones of the correct amperage.
- Damaged Wiring Harness: Look for frayed or pinched wires and repair them as needed.
When to Visit Big Dog Powersports: Electrical issues can be tricky to diagnose. Our team has the tools and expertise to identify and fix complex electrical problems.
6. Transmission Problems
Symptoms:
- Difficulty shifting gears
- Grinding or clunking noises
- Slipping out of gear
Potential Causes and Solutions:
- Low or Contaminated Transmission Fluid: Check fluid levels and replace old fluid with the manufacturer’s recommended type.
- Worn Clutch Components: Inspect and replace worn clutches or springs.
- Damaged Gearbox: Internal damage may require a complete teardown and rebuild.
When to Visit Big Dog Powersports: Transmission repairs can be complex. Let our trained technicians handle the heavy lifting to get you back on the trails.
7. Brake Problems
Symptoms:
- Spongy or unresponsive brakes
- Squealing or grinding noises
- Brake warning light on the dash
Potential Causes and Solutions:
- Worn Brake Pads: Inspect and replace pads that are below the recommended thickness.
- Air in the Brake Lines: Bleed the brake system to remove air bubbles.
- Leaking Brake Fluid: Check for leaks in the lines, calipers, or master cylinder.
When to Visit Big Dog Powersports: For your safety, don’t delay brake repairs. We’ll ensure your Maverick’s braking system is in top shape.
Why Choose Big Dog Powersports?
At Big Dog Powersports, we specialize in servicing Can-Am Mavericks and other UTVs in Wichita, Kansas. Our experienced technicians use genuine parts and advanced diagnostics to ensure your machine is repaired correctly the first time. Whether you need routine maintenance or major repairs, we’ve got you covered.
Contact Us Today to schedule an appointment or speak with our team about your Can-Am Maverick concerns. Let’s keep your UTV performing at its best on every adventure!
